Http://mywifiext.net Help

The most common problem that users face is dead spots or when the signal has a hard time reaching the client’s device due to some barriers. Extenders are the solutions to these problems. Wireless Extenders(www.mywifiext.net) or often called as “boosters” are intended to be used in such situations where the user is having a hard time finding the signal or they are having a hard time getting out of dead spots. The Extenders are extensively used for extending the coverage of the main router so that users can roam all around their house or office without facing any signal issues. It is often used in large houses or offices. It provides a more reliable connection as compared to just installing a router which, is satisfactory in itself, but sometimes there are a few dead spots or the signal has a hard time piercing the concrete walls or reaching other floors of the house or office. The Extender will expand the coverage of the main router in every corner of the house and even outside the house.

What is Netgear Extender?

Netgear Wireless Extenders are one of the best extenders in the market. They provide reliable connection along with a much greater coverage and also add to the aesthetic quotient of the house. They can be installed anywhere in the range of the main router to extend the coverage of the main router and so that it can increase the coverage of the wireless connection. The settings can be modified according to the user’s wishes by going to the extender login page by typing www.mywifiext.net in the address bar. Here are some of the reasons as to why a Netgear Extender should be installed:

  • If the user uses the wireless internet outside the house such as their garage or the deck, and the main router just isn’t cutting it, an extender can be installed near the place where the user wishes and it will provide the signals without any trouble.
  • If the user wishes to use the internet on another floor and the thick concrete walls are making it difficult for the signals to travel to the other floors, installing an extender will help remove this issue and provide the wireless signals.
  • A small business place where there is only one wireless connection installed, and the coverage area is more that what the router has to offer, an Extender will solve this problem.

There are several models to choose from as desired by the user which fits the needs of the user the best. It can be used to keep all your devices connected to the wireless connection even if they are placed in different rooms or even different floors.

How does the Netgear Extender work?

The Netgear Extender repeats the wireless signal coming from the router and it expands it to provide much more coverage. It captures the wireless signal from the main router and it rebroadcasts it to the areas where the signals cannot reach or are completely nonexistent. The Extender will broadcast the signal where your dead spots are, but it will also take it a step further and provide coverage in your basements or even the backyard. You just have to place the extender at the halfway point between the router and the desired place.

Here, we will show you how to install and set up the extender and upgrade the firmware of the extender.

How to install the Netgear Extender for the first time

It is advised that the Netgear Extender is brought in the same room as the Netgear Wireless Router. Once the initial setup is complete, the extender can be placed in the intended location. Here are some steps to set up the Netgear Extender:

  • Turn on the power of the Extender and wait for the power light to turn green.
  • On your wireless device, open the wireless connection manager and look for the NETGEAR_EXT username and connect to it. This will be the default username for your Netgear Extender. You can wish to change it later.
  • Now, open up a web browser from the same wireless device and it will automatically take you to the on screen Netgear Genie setup page. Alternatively, you can type www.mywifiext.net in the address bar of your browser to access the login page of your Netgear Extender.
  • The Netgear Genie will now search for all the existing wireless networks in the area. After the search is complete, a list of all the wireless networks which are within the range of the extender will display. Select the name of the wireless network that you wish to extend and click Continue.
  • If you have set up a password on the wireless connection that you wish to extend, then the setup page will prompt you to type in that same password for the wireless connection. Enter the password for the wireless connection that you wish to extend and click Continue.
    If by some chance you do not see the name of your wireless network that you wish to extend, make sure that the Extender is within the range of the main wireless connection range.
  • There will be options of different bandwidths that you main router may support. If your router supports 5 GHz bandwidth option, then select the 5 GHz wireless network of your existing router and click Continue. If it does not support 5 GHZ bandwidth option, then select My router does not support 5 GHz band. Click Contiue.
    There might be times when the wireless connection of the router and the extender failed to establish, in that case try turning off and then turning on all your devices so that the network is refreshed.
  • After the extender has initialized the connection with the router, the display page will ask you whether you wish to change the wireless settings of the Netgear Extender. If you wish to leave the default settings unchanged, you can always come back later to change the settings. Click Continue to save the setup process and all the settings.
  • Almost after two minutes, you will see a window saying You are now one step away from completing the installation. After this, you will be automatically disconnected from the Extender wireless network.
  • Now, connect to the Netgear Extender using your wireless device. After you have connected to the Extender’s wireless network, go back to the Netgear Extender screen. There will be an option at the bottom saying My wireless devices are connected to the External Network. Check the same option.
  • You will see a page saying “Congratulations!”That means your Netgear Extender is connected successfully. Click Finish to close the setup window.

Your Netgear Wireless Extender will now be setup and ready to use. You can place the Extender where ever you desire within the range of the main router and you can start using your internet.

How to connect to the Netgear Extender manually

If your Netgear Wi-Fi Extender with an Ethernet port, here are the steps to connect to the Extender manually:

  1. Connect the Netgear Wi-Fi Extender to the computer using an Ethernet cable.
  2. Now, open up a browser of your choice and type www.mywifiext.net in the address bar to access the login page.
  3. You will be prompted to type in the username and the password. The default username is “admin” and the default password is “password”.
    The username and password are both case sensitive.
  4. After successfully logging in, go to Wireless Settings under the Setup tab.
  5. Under the Security Options, check the Password field and make sure it matches the password of your main router that the Extender is connected to.
  6. Click Apply to save the settings.

Now, you can connect your wireless devices to the Netgear Wi-Fi Extender.

How to connect to the Netgear Extender wirelessly

  1. Reset your Netgear Wi-Fi Extender back to its factory default settings.
  2. Connect via Wi-Fi to your Netgear Wi-Fi Extender.
  3. Now, open up a web browser of your choice and type www.mywifiext.net in the address bar.
  4. You will be prompted to type in the username and the password. The default username is “admin” and the default password is “password”.
    The username and password are both case sensitive.
  5. Follow the Setup Wizard to set up your Netgear router.
  6. Save the changes.

Now, you can connect your wireless devices to your Netgear Wi-Fi Extender.

How to upgrade the firmware of Netgear Wi-Fi Extender

It is advised that the upgrade is performed through a computer connected to the Netgear Wi-Fi Extender through an Ethernet cable. Here are some steps to upgrade the firmware on your Netgear Wi-Fi Extender:

  1. First, log in to the Netgear Wi-Fi Extender.
  2. Under the Management menu, select the Wireless Extender Status.
  3. You can get the latest firmware from www.NETGEAR.com/support. Select Downloads from the menu bar.
  4. Under Downloads, check for the most recent firmware for your extender.
  5. If the number on the website is more recent than your Netgear Extender status screen, then download and save the firmware to a desired location.
  6. Now, log in to the Netgear Wi-Fi Range Extender and select Firmware Update under the Maintenance menu.
  7. Click Browse and search for the downloaded file.
  8. After you have located the file, click Upload. The upload process might take a couple of minutes. Once the upload process is complete, the extender will restart.

It is crucial that the Extender is not used or the power is not turned off while it is restarting as it may damage the Extender or render it useless. After the restart is done, you can now start using your Netgear Wi-Fi Extender.

Here are some Frequently Asked Questions (FAQ’s) answered:

  • Can the Netgear Wi-Fi Extender work with my existing router?
    Yes, it can. Netgear Wi-Fi Extenders are universal extenders and are compatible with majority of the routers on the market.
  • Where should I place my Wi-Fi Extender?
    For the best results, you should place your Wi-Fi Extender in the halfway point between your wireless router and the device you intend to use.
  • How do I log in to my Netgear Wi-Fi Extender?
    You can visit www.mywifiext.net to log in to your Netgear Wi-Fi Extender.
  • What are the default username and password for www.mywifiext.net login page?
    The default username is “admin” and the default password is “password”.
  • How can I go to the Netgear Genie app?
    You can access the Netgear Genie by typing www.mywifiext.net in the address bar of a web browser.
  • Can I add more than one Wi-Fi extender to my home network?
    Yes, you can have more than one Wi-Fi Extender connected to your network.
  • Do I have to shut down my extenders or can I keep them running?
    You can leave them on for as long as you wish.
  • Will resetting the extender reset my personalized settings too?
    Yes, resetting the Netgear Wi-Fi Extender will reset the personalized settings as well.
  • How can I configure the Wi-Fi extender?
    You can configure your Netgear Wi-Fi Extender by logging in to www.mywifiext.net.
  • Can I set up different passwords for my Router and Extender?
    Yes, you can.